Temporary Floor Protection - A Product Guide





Your floors need special protection when undergoing remodeling, during new construction, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of the hammer, a scratch from heavy furniture cost thousands in replacement and repairs. This short article describes surface protection products for floors to enable you to make informed alternatives on the very best product to use for the needs you have. Types of Protection Packaging:

image

Floor protection merchandise is commonly packaged as either:

(1) Products from the roll: Such as common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased through the roll are normally measured thick by mils (e.g., 2.5 mils thick around 48 mils thick).

(2) Products from the sheet: Such as corrugated plastic, masonite, along with other rigid protection. Protective materials purchased through the sheet are generally measured in depth from the inch (e.g., 1/4-inch thick) and normally be 4 feet by 8 feet.

Paper protection would work for all hard surfaces and resilient surfaces but doesn't work well to protect carpets as it may tear when flexing under footsteps. Paper merchandise is breathable so that glue fumes and cement curing vapors can escape. One problem with paper products because they require tapes to secure them to flooring and tapes may leave adhesive residue when removed. Common paper protection products include:

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.0 as much as 3.5 mils in depth. They trap any moisture from escaping so they mustn't be used on any floors which are curing. Gadget amazing benefits of polyethylene films are that films will flex and contour to enable them to provide on carpets in addition to hard surfaces. These films do not offer any impact protection and are normally rated abbreviated term using 30 to 3 months only. Polyethylene films are designed for one-time use , nor use recycled materials which makes them an unhealthy choice in sustainable protection. Protection films can be bought in various adhesion "tack". Hard surface protection films will have a lower tack and color than carpet protection which wants a more aggressive glue to carry onto carpet successfully.


Plywood and Masonite are normally utilized as protection on commercial projects with many different foot traffic. Masonite is a wood product made out of wood fibers unlike plywood that is an actual sheet of thin wood. Both plywood and Masonite can be purchased inside the standard sized 4 feet by 8 feet and they are more costly per square feet than paper or polyethylene products. Masonite is frequently 1/8 or 1/4 inch thick. Plywood is often 1/4 inch to 3/4 inch thick. Both products provide impact protection on a selection of floor types and offer adequate protection against heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable however are bulky to carry and store. These wood sheets should be utilized on top of a softer protection such as a rolled textile because they easily scratch flooring. These sheets work nicely to protect carpet since they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite usually do not offer moisture protection and is harder to reduce to size than other protection types.

Textile items are commonly manufactured from recycled cloth. Additionally, these rolled protection products often have benefits like skid resistant backings or breathable plastic liners. For wooden flooring, these specialty textile rolls are strongly recommended since they are breathable, skid resistant, reusable, often leakproof and simple to cut to size.
To get more information about correx just go to our new website: visit site
Sign In or Register to comment.